ResMed AirSense 10 CPAP with Integrated Humidifier
$758.00
The ResMed AirSense™ 10 CPAP is designed for the treatment of sleep apnea and is intended for both home and hospital use.
The ResMed AirSense™ 10 CPAP is designed for the treatment of sleep apnea and is intended for both home and hospital use. It has a wide variety of patient comfort features to ensure a comfortable night’s sleep. With a full color LCD, the AirSense™ 10 CPAP is user-friendly. Simply press start, or use SmartStart™, which automatically starts air pressure after you breathe into the mask. It also features AutoRamp™, which helps you fall asleep by starting with a lower initial pressure, while increasing to your prescribed pressure over a custom 0-45 minute range. Its integrated humidifier provides thorough continuous humidification during the night for a better night’s sleep. Breathing is even easier with EPR™. This patented technology lowers air pressure during exhalation, and increases it during inhalation, facilitating a more natural breathing pattern, and with a noise level of only 27 dBA, you’ll have your best night’s rest every night.
Additional information
| Product content | CPAP Machine |
|---|---|
| Weight - Machine with Water Chamber | 2.75 lbs (44 oz.) |
| Dimensions - Machine with Water Chamber | 10.04 in L x 4.57 in W x 5.91 in H |
| Weight - Standard Chamber | .54 lb |
| Weight - Machine with Side Cover (Without Water Chamber) | Approx. 2.452 lbs |
| Dimensions - Machine with Side Cover (Without Water Chamber) | Approx. 8 in L x 4.57 in W x 5.91 in H |
| Dimensions - Travel Bag | 13.24 in L x 10 in W x 5 in H |
| Weight - Travel Bag Alone | 1.18 lb |
| Weight - Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag | Approximately 5.25 lbs |
| Sound Level | 26.6 dBA |
| Water Chamber Capacity | 380 mL |
| Weight - 90W Power Supply, Cord and Plug | 1.29 lb |
| Dimensions - 90W Power Supply Only (Not including Cor or Plug) | 5 1/2 in x 1 7/8 in x 1 1/4 in |
| AC Input Range - 90W Power Supply | 100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II |
| DC Output - 90 W Power Supply | 24V — 3.75A |
| Typical Power Consumption | 53W (57VA) |
| Peak Power Consumption | 104W (108VA) |
| Operating Pressure | 4 – 20 cm H2O (0.2 cm increments) |
| Length - SlimLine Tubing | 6 feet |
| Materials - SlimLine Tubing | Flexible Plastic |
| Materials - Standard Water Chamber | Injection Molded Plastic, Aluminum , Silicone Seal |
| Materials - Dishwasher Safe Water Chamber | Injection Molded Plastic, Stainless Steel, Silicone Seal |
| Materials - Standard Filter | Polyester non-woven fiber |
| Temperature Range - Optional ClimateLineAir™ Heated Tube | 60 – 80° F (16 – 30° C) |
| Operating Temperature | 41° F – 95° F (5° C – 35° C) |
| Storage and Transport Temperature | -4° F – 140° F (-20° C – 60° C) |
| Operating Humidity | 10% – 95% Relative Humidity, non-condensing |
| Storage and Transport Humidity | 5% – 95% relative Humidity, non-condensing |
| Operating Altitude | Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa |
| Maximum Temperature - Heating Plate | 154° F (68° C) |
| Maximum Temperature - Cut Out | 165° F (74° C) |
| Maximum Gas Temperature | Less than or Equal to 106° F (? 41° C) |
| IEC 60601-1:2005 Classification | Class II (Double Insulation), Type BF, Ingress protection IP22 |
| Machine Warranty | 2 Years |
| Patient Weight | Greater than 66 lbs |
| Cleaning Instructions | The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask. |
| Required Settings | 1 Pressure Setting is Required |
| Humidifier Features | AutoRamp™ with sleep onset detection |
Warranty
The products sold by MySleepap.com® are backed by manufacturer warranties that protect you against manufacturer defects of materials and craftsmanship. Products under warranty are subject to a return validation. This inspection will determine if the damage can be repaired or if the product needs to be fully replaced. Water damage issues will not be considered for warranty replacement by the manufacturer. How to Return Your Warranty Equipment Contact mysleepap.com if you believe your CPAP equipment is defective and not working properly. If a return of your product(s) is approved, an return authorization number will be issued to you, a note in the return package stating what the problem seems to be should be included. Please contact us via email: info@mysleepap.com or by telephone. A MySleepap.com agent can answer all your questions on how to send your defective equipment to: Harmony Healthcare Supplies info@mysleepap.com 626-462-1400 34 E. Huntington Dr, Arcadia, CA 91006 International Customers Warranty Information International Warranty eligibility follows the same guidelines above. Warranty and repair claims on CPAP and BiPAP/BiLevel machines that are purchased from MySleepap.com and shipped internationally must be shipped back to our company in the United States for any warranty or repair claim. Warranty Details For CPAP, BiPAP, Auto CPAP, APAP BiLevel Machines And Humidifiers- ResMed: 2 Years
- Philips Respironics: 2 Years
- Fisher & Paykel: 5 Years
- DeVilbiss: 5 Years
- ResMed: 90 Days
- Philips Respironics: 90 Days
- Fisher & Paykel: 90 Days
- Devilbiss: 90 Days
Reviews
There are no reviews yet.