ResMed AirCurve 10 S BiLevel Machine with HumidAir Heated Humidifier

$1,726.00

100 in stock

-

Designed for patients who aren’t a good match with continuous positive airway pressure (CPAP) devices, the AirCurve™ 10 S is a bilevel fixed air pressure machine that features automatic breathing adjustment, a built-in humidifier, leak compensation technology, and wireless connectivity.

Compare
SKU: 37213 Category:

Designed for patients who aren’t a good match with continuous positive airway pressure (CPAP) devices, the AirCurve™ 10 S is a bilevel fixed air pressure machine that features automatic breathing adjustment, a built-in humidifier, leak compensation technology, and wireless connectivity. Allowing both patients and doctors access to therapy data and remote device settings to deliver better sleep therapy. It’s optimized for comfort with it’s Easy-Breathe™ pressure waveform function, which identifies and copies normal breathing patterns then replicates it for more comfortable sleep, while also detecting CSA (Central Sleep Apnea) events. The AirCurve™ 10 S provides consistently comfortable breathing air with its built-in humidifier and heated air tubes. It’s also reliable, using its continuous leak management system to maintain your prescribed air pressure throughout the entire night. You are also able to customize your flow cycle with TiControl™, to control synchrony between the air pressure therapy and the patient’s own breathing. The AirCurve™ 10 S and its wide variety of comfort oriented features will ensure every night’s sleep is your best night’s sleep.

Be the first to review “ResMed AirCurve 10 S BiLevel Machine with HumidAir Heated Humidifier”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Additional information

Product content

BiLevel Machine
Built-In HumidAire Heated Humidifier
Standard Water Chamber
6 Ft SlimLine Tubing – 15mm Diameter
Power Supply and Cord
Travel Bag
1- Standard Filter (Installed)
Filter Cover
Patient Manual

Weight - Machine with Water Chamber

2.75 lbs (44 oz.)

Dimensions - Machine with Water Chamber

10.04 in L x 4.57 in W x 5.91 in H

Weight - Standard Chamber

.54 lb

Weight - Machine with Side Cover (Without Water Chamber)

Approx. 2.452 lbs

Dimensions - Machine with Side Cover (Without Water Chamber)

Approx. 8 in L x 4.57 in W x 5.91 in H

Dimensions - Travel Bag

13.24 in L x 10 in W x 5 in H

Weight - Travel Bag Alone

1.18 lb

Weight - Machine with Humidifier; Power Supply and Cord; SlimLine Tube; Travel Bag

Approx. 5.1 lbs

Weight - Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag

Approx. 5.25 lbs

Sound Level (CPAP Mode)

26.6 dBA

Water Chamber Capacity

380 mL

Weight - 90W Power Supply, Cord and Plug

1.29 lb

Dimensions - 90W Power Supply Only (Not including Cord or Plug)

5 1/2 in L x 1 7/8 in W x 1 1/4 in H

AC Input Range - 90W Power Supply

100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II

DC Output - 90 W Power Supply

24V — 3.75A

Typical Power Consumption

53W (57VA)

Peak Power Consumption

104W (108VA)

Operating Pressure VPAP Mode

4-25 cm H2O (0.2 cm increments)

Operating Pressure CPAP Mode

4 – 20 cm H2O (0.2 cm increments)

Materials - Standard Water Chamber

Injection Molded Plastic, Aluminum, Silicone Seal

Materials - Dishwasher Safe Water Chamber

Injection Molded Plastic, Stainless Steel, Silicone Seal

Materials - Standard Filter

Polyester Non-woven Fiber

Included Hose Dimensions

6 Ft Long, 15mm Interior Diameter, 22mm Cuff attachment

Hose Materials

Flexible Plastic

Temperature Range - Optional ClimateLineAir™ Heated Tube

60 – 80° F (16 – 30° C)

Operating Temperature

41° F – 95° F (5° C – 35° C)

Storage and Transport Temperature

-4° F – 140° F (-20° C – 60° C)

Operating Humidity

10% – 95% Relative Humidity, non-condensing

Storage and Transport Humidity

5% – 95% relative Humidity, non-condensing

Operating Altitude

Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa

Maximum Temperature - Heating Plate

154° F (68° C)

Maximum Temperature - Cut Out

165° F (74° C)

Maximum Gas Temperature

Less than or Equal to 106° F (41° C)

IEC 60601-1:2005 Classification

Class II (Double Insulation), Type BF, Ingress protection IP22

Machine and Humidifier Warranty

2 Years

Patient Weight

Greater than 66 lbs

Optional Supplemental Oxygen

Operates with up to 15L/min of supplemental oxygen

Cleaning instructions

The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber SHOULD NOT be washed in a dishwasher or washing machine. The long hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.

Required Settings

This machine requires two pressure settings and a Spontaneous rate.

Default settings

Ramp Time – 20 min
Start EPAP – 3.0
Humidity Level – 4
Mask – Full Face
Airplane Mode – OFF
Mode – S
Easy-Breathe – ON
Ti Max – 2.0s
Ti Min – 0.3s
Rise Time – Min
Trigger – Med
Tube – Slimline
AB Filter – No
Leak Alert – OFF
SmartStart – OFF
Language – English
Temperature – Degree Fahrenheit

Warranty

The products sold by MySleepap.com® are backed by manufacturer warranties that protect you against manufacturer defects of materials and craftsmanship. Products under warranty are subject to a return validation. This inspection will determine if the damage can be repaired or if the product needs to be fully replaced.  Water damage issues will not be considered for warranty replacement by the manufacturer.

How to Return Your Warranty Equipment
Contact mysleepap.com if you believe your CPAP equipment is defective and not working properly. If a return of your product(s) is approved, an return authorization number will be issued to you, a note in the return package stating what the problem seems to be should be included. Please contact us via email: info@mysleepap.com or by telephone.

A MySleepap.com agent can answer all your questions on how to send your defective equipment to:

Harmony Healthcare Supplies
info@mysleepap.com
626-462-1400
34 E. Huntington Dr, Arcadia, CA 91006

International Customers Warranty Information
International Warranty eligibility follows the same guidelines above. Warranty and repair claims on CPAP and BiPAP/BiLevel machines that are purchased from MySleepap.com and shipped internationally must be shipped back to our company in the United States for any warranty or repair claim.

Warranty Details For CPAP, BiPAP, Auto CPAP, APAP BiLevel Machines And Humidifiers
  • ResMed: 2 Years
  • Philips Respironics: 2 Years
  • Fisher & Paykel: 5 Years
  • DeVilbiss: 5 Years
Warranty Information for CPAP Masks
Please note this applies to products with manufacturer defects in material and does not apply to normal wear and tear. Please refer to your owner’s manual for proper care instructions and maintenance for a longer life span of your CPAP mask and accessories. Warranty for manufacturers defects is as follows:
  • ResMed: 90 Days
  • Philips Respironics: 90 Days
  • Fisher & Paykel: 90 Days
  • Devilbiss: 90 Days

Main Menu

ResMed AirCurve 10 S BiLevel Machine with HumidAir Heated Humidifier

$1,726.00

Add to Cart